Corby Kendal Manual De Instrucciones página 13

USE
SETTINGS
The air flow and temperature can be adjusted using the switches located on the
handle of the hair dryer.
Heat Setting
C Cooler Blow (not applicable to all models)
1/Min Normal Heat
2/Max High Heat
(1) Use heat setting 1/Min for gentle drying and styling.
(2) Use heat setting 2/Max for fast drying or pre-drying.
(3) After drying hair, use heat setting C, if available, to set style with a continuous
flow of cooler air.
IMPORTANT
If the appliance overheats, it will switch off automatically. Unplug the
appliance and let it cool down for a few minutes. Before you switch the
appliance on again, check the grilles to make sure they are not obstruct-
ed by fluff, hair, etc.
DRYING
1. Put the plug in the wall socket (if required).
2. Select the desired heat using the control on the handle.
3. Switch the appliance on by holding the on/off button, or using the speed
control on the handle.
4. Dry your hair by making brushing movements while holding the dryer at a short
distance from your hair.
ATTACHMENTS
Some models are supplied with attachements.
Concentrator - the concentrator attachment enables the directing of airflow to a
more specific area of hair. Connect the concentrator by simply clicking it onto the
appliance. Disconnect it by pulling it off.
Do not use attachments not recommended by the manufacturer.
STORAGE
Allow the hair dryer to cool after use and store in a dry location. Never wrap the
power cord around the hair dryer.
CARE
When cleaning, or storing away, always pull out the plug from the socket outlet. Never
yank the cord to disconnect from the outlet, instead grasp the plug and pull to
disconnect.
This appliance should be cleaned with a dry cloth. Remove the concentrator from the
hair dryer before cleaning. Never rinse the appliance with water
.
1 3