Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
CAUSE
CORRECTION
Air leak from
Possible defect in safety
Operate safety valve manually
safety valve,
valve,
by pulling on ring.
If valve still
leaks, it should be replaced.
Decrease amount of air usage.
Compressor
is
not supplying
enough air to
operate
accessories.
Prolonged excessive use of
air.
Compressor
is not large
enough for air requirement.
Hole in hose.
Check valve restricted.
Air leaks.
Restricted air intake filter
Loose belt.
Check the accessory air
requirement.
If it is higher than
the SCFM or pressure supplied
by your air compressor, you
need a larger compressor.
Check and replace if required.
Remove and clean, or replace.
Tighten fittings.
Clean or replace air intake
filter. Do not operate the air
compressor with the filter
removed. Refer to the "Air
Filter" paragraph in the
"Maintenance
" section.
Loosen wingnut and then
tighten wingnut until it contacts
the washer, plus one turn.
Restricted air
Dirty air filter.
Clean or replace.
See Air Filter
intake
paragraph in the Maintenance
section.
Squealing
sound.
Compressor
pump has no
oil.
Loose belt.
See Oil-Checking
paragraph in
the Maintenace section.
Loosen wingnut and then
tighten wingnut until it
contacts the washer, plus one
turn.
D24917
24-ENG
Publicidad
