Publicidad
Idiomas disponibles
Idiomas disponibles
2) Specific Failure & Solution
Failure
The LED does not
come on when unit is
plugged in.
Some buttons can't work, or
the LED display is not
normal.
The
Cooking
Indicator comes on, but
heating does not start.
Heating stops suddenly
during operation and the
display flashes "u".
Heating zones of the same
side ( Such as the first and
the second zone ) would
display "u" .
Fan
motor
abnormal.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the induction
hob.
Problem
No power supplied.
The accessorial power
board and the display
board connected failure.
The accessorial power
board is damaged.
The display board is
damaged.
The display board is
damaged.
Mode
High temperature of the
hob.
There
is
wrong with the fan.
The
power board is
damaged.
Pan Type is wrong.
Pot
diameter
small.
Cooker has overheated;
The power board and
the
display
connected failure;
The display board of
communicate
damaged.
The
Main
damaged.
sounds
The
fan
damaged.
Solution A
Check to see if plug is
secured tightly in outlet
and that outlet is working.
Check the connection.
Replace the accessorial
power board.
Replace
board.
Replace
board.
Ambient temperature may
be too high. Air Intake or
Air Vent may be blocked.
something
Check whether the fan
runs
smoothly；
if not , replace the fan.
Replace the power board.
Use the proper pot (refer
to the instruction manual.)
is
too
Unit is overheated. Wait
for temperature to return
to normal.
Push "ON/OFF" button to
restart unit.
Check the connection.
board
Replace
part
is
board.
board
is
Replace the power board.
motor
is
Replace the fan.
78
Solution B
the
display
the
display
Pan
circuit is damaged,
replace the power
board.
the
display
detection
Publicidad
