Publicidad
Idiomas disponibles
Idiomas disponibles
5
C
17
C
C
21
D
D
6
B
7
3
C
4
8
C
2
MOUNTING THE CART BRACKETS
PARTS REQUIRED:
1
x
Power Cord Bracket (#17)
1
x
Ash Clean-out Housing (#21)
2
x
Grease Tray Brackets (#23)
10
x
Screw (#C)
2
x
Screw (#D)
INSTALLATION:
•
Locate the two holes on the Support Bar. Mount the Power Cord Bracket to the
23
Support Bar using two screws (C).
•
Mount the Ash Clean-out Housing to the bottom of the Main Cabinet with 4
screws (C). Fasten it with the Left and Right Front Panels using one screw (D)
on each panel.
•
Mount the Grease Tray Brackets to the bottom of the Main Cabinet using four
screws (C).
•
Fully-tighten all screws on the cart base. Next, carefully turn the unit into an
upright position, with the wheels on the bottom.
MOUNTING THE BACK HANDLE
PARTS REQUIRED:
1
x
Hopper Handle (#6)
4
x
Screw (#B)
INSTALLATION:
B
•
Mount the Hopper Handle onto the back side of the hopper using four screws.
6
SECURING THE CHIMNEY
PARTS REQUIRED:
1
x
Chimney Cap (#3)
1
x
Chimney Stack (#4)
4
x
Screw (#C)
INSTALLATION:
•
Locate the Chimney Opening on the top of the Main Cabinet. From the outside,
secure the Chimney Stack to the top panel using four screws. The screw will
fasten to the self-clinching nut on the inside of the cabinet. Next, twist the
Chimney Cap onto the top of the Chimney Stack.
NOTE: ADJUST THE CHIMNEY CAP TO AFFECT THE AIRFLOW INSIDE THE MAIN
GRILL. IF COOKING AT LOW TEMPERATURE, KEEP THE CHIMNEY CAP MORE
OPEN.
INSTALLING THE LID STOPPER
PARTS REQUIRED:
1
x
Lid Stopper (#2)
2
x
Screw (#C)
INSTALLATION:
•
Install the Lid Stopper onto the top of the Main Cabinet near the hopper lid,
C
using one screw on the top side and one screw on the inside edge between the
hopper lid hinges.
www.louisiana-grills.com
5
Publicidad
