Publicidad
Idiomas disponibles
Idiomas disponibles
6
9
A
10
10
C
B
10
11
LOUISIANA GRILLS
A
12
D
11
20
ATTACHING THE HOPPER CLEAN-OUT DOOR KNOB
PARTS REQUIRED:
1
x
Door Knob (#A)
INSTALLATION:
•
Attach the Door Knob to the hopper clean-out door by rotating the part into
the hole on the door. Rotate until completely fastened and clean-out door
latch is secured.
NOTE: TO USE THE HOPPER CLEAN-OUT FEATURE, SIMPLY LOOSEN THE DOOR
KNOB, RAISE THE CLEAN-OUT DOOR LATCH AND OPEN THE DOOR.
MOUNTING THE CABINET DOOR HANDLE, DOOR LATCH
PARTS REQUIRED:
1
x
Cabinet Door Handle (#10)
1
x
Cabinet Door Latch (#11)
1
x
Cabinet Door Heat Filter (#12)
2
x
Screw (#C)
2
x
Screw (#D)
INSTALLATION:
•
Mount the Cabinet Door Handle onto the front side of the Cabinet Door using
two screws (C). Note correct direction in 10A.
•
Install the Cabinet Door Latch and Door Latch Heat Filter onto the exterior
side of the Main Cabinet using two screws (D). Note 10B.
IMPORTANT: FINE TUNE AND TEST THE CABINET DOOR LATCH AND HOOKS
TO ENSURE THEY ALIGN PROPERLY AND THERE IS A PROPER SEAL WHILE THE
CABINET DOOR IS CLOSED. POOR ALIGNMENT MAY RESULT IN HEAT LOSS AND
LEAKS DURING USE.
INSERTING THE ASH CLEAN-OUT TRAY
PARTS REQUIRED:
1
x
Ash Clean-out Tray (#20)
INSTALLATION:
•
Open the Cabinet Door. Next, insert the Ash Clean-out Tray into the Ash Clean-
out Housing on the front panel of the unit, below the Front Shelf. Tighten the
bottom screw counterclockwise to lock into place.
IMPORTANT: ENSURE THE ASH CLEAN-OUT TRAY IS INSERTED COMPLETELY TO
PROPERLY COLLECT ASH FROM THE MAIN CABINET.
Publicidad
