Cardin Elettronica DKS 250 Manual Del Usuario página 15

2d Type the function access code into the keyboard
(max 6 digits e.g. 1-2-3-4-5-6) and press confirm "
2e
The green LED "L1" will flash and the red LED
"L2" will switch off on the interface.
The access code has been memorised!
3. Storing codes and selecting functions
3a
Remove jumper "J2" from the interface
3b
Press button "P1" on the interface for at least three seconds
3c The red LED "L2" will flash on the interface
At this point the memorising procedure is active!
3d Type the desired numerical code into the keyboard
(max 6 digits e.g. 1-2-3-4-5-6) and press confirm "
3e The keyboard will emit one beep for two seconds
and the green LED will light up
The code has been accepted
3f Within 13 seconds of confirming the code press one or more
functions A-B-C-D in sequence (e.g. A-C)
3g Press confirm "
3h
The green LED "L1" will flash on the interface
The code has been memorised and the functions have been assigned (e.g. A-C).
*
" and the key board will emit a beep
15
*
"
O N
L 1
*
*
"
*
9 D
4
8
*
7
0
*
F
O F
L 2
3 sec
O N
L 2
9
D
4
8
7
0
*
ON
3
B
2
6
1 C
A
3
B
2
6
1 C
5
9
D
4
8
9 D
4
8
7
0
*
O N
L 1