Mighty Seven DW-404 Manual Del Usuario página 13

4. Position the direction-of-rotation selector
to the left of the tool for reverse rotation,
Press the loose stop mode-selector button
: the loose stop mode is available and the
loose stop indicator will be on. When the
bolt/nut is loose, the tool stops the impact
and rotation after approximately one
second.
5. To turn off the loose stop function, press
the loose stop mode-selector button for :
the loose stop function will turn off.
ELECTRIC BRAKE
The Impact Wrench is equipped with an
electric brake. When the trigger switch
is released, the electric brake engages
automatically to quickly stop the rotation.
LED WORKLIGHT (FIG. 5)
FIG. 5
LED worklight, located on the base of the
Impact Wrench, will illuminate when the
trigger switch is depressed. This provides
additional light on the surface of the
workpiece for operation in lower-light areas.
The light will automatically turn off within 10
seconds after releasing the trigger.
OPERATION
LED Worklight
INSTALLING THE BELT CLIP (FIG.
FIG. 6
1. Align the rib of the belt clip with the holeon
the base of the wrench.
2. Insert the screw and tighten the screw
securely with a screwdriver (available
separately).
REMOVING THE BELT CLIP
1. Use a screwdriver (available separately)to
loosen the screw that attaches the belt clip
to the wrench.
2. Remove the screw and the belt clip.
6)
Belt Clip
13