SPECIFIC SAFETY WARNINGS:
1. Use only with the chargers and batteries
listed below:
Battery Pack
DB-1850P
WARNING
For use only with
For use only with
2. Always wear safety goggles and ear
protector when using this tool.
3. Prevent vibration and using wrench in
a short time. Should wear vibration-
absorbing gloves and watch out no loosen
parts of gloves to prevent entanglement by
wrench.
4. Ensure the switch is in the off position
before inserting battery pack. Inserting the
battery pack into power tools that have the
switch on invites accidents.
5. Check the impact socket carefully for wear,
cracks or damage before installation.
6. Bit, sockets and tools get hot during
operation. Wear gloves when touching
them after use.
7. Remove the battery pack before changing
accessories. Accidental starting may occur,
because battery appliances with a battery
inserted are in the operative condition.
Switch is off before attaching the battery
pack.
WARNING
Some dust created by power sanding,
sawing, grinding, drilling and other
construction activities contains chemicals
known to cause cancer, birth defects or other
reproductive harm. Some examples of these
chemicals are:
SPECIFIC SAFETY RULES
Charger
DC-18A
Li-Ion battery pack.
battery charger.
• Lead from lead-based paints
• Crystalline silica from bricks and cement
and other masonry products, and
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
5