cecotec EasyToast Basic Manual De Instrucciones página 11

ENGLISH
to be transported in the future. In case the original packaging is disposed of, make sure all packaging materials
are recycled accordingly.
• Plastic wrapping can cause suffocation hazards for babies and young children. Make sure all packaging mate-
rials are out of reach of children.
• Inspect all parts of the appliance for visual damage. Unwind the power cord completely and inspect it for da-
mage. Do not use the appliance if the toaster or its cord have been damaged or are not working properly. In case
of damage, contact the official Technical Support Service of Cecotec for advise, repairs, or returns.
• Make sure you have read and understood all instructions and warnings in this instruction manual. Pay particu-
lar attention to the safety instructions on previous pages.
• Remove any adhesive labels and wipe the outside of the toaster with a damp cloth. Make sure no packaging
materials remain in the toasting slot and no object has fallen inside the toaster.
• Place the toaster on an even, heat-resistant surface. Do not place the toaster near heat sources, places with
high humidity levels, or combustible materials.
• Plug the toaster into an appropriate wall outlet. The plug must be accessible so that, in case of an emergency,
it can be easily unplugged.
4. OPERATION
1. Make sure the crumb tray is properly placed before use. It is located underneath the heating elements and can
be pulled out from the side of the toaster opposite to the control panel.
2. Place the toaster on a clean, stable, heat-resistant surface. Make sure that no liquid or flammable object is
placed near the appliance.
3. Plug the toaster to a properly installed wall outlet.
4. Select the intensity with the intensity dial. The intensity may be adjusted before or right after pressing the
On button. There are 6 intensity levels available for precise results. Simply select the desired level according to
your needs.
NOTE: select intensity 3 when using the toaster for the first time, then, adjust the intensity to your liking for
following uses (use a lower intensity for thinner slices).
5. To stop the toasting process at any time, press the stop button.
6. If you want to toast more bread, allow the toaster to cool down for 15-20 seconds between toasting cycles.
7. Unplug the appliance after use and let it cool down before cleaning or storing it.
NOTE: the indicator light will turn on when the appliance is working. When it finishes, the appliance will switch
itself off automatically, along with the light, and a buzzer will sound.
Thanks to its design the toaster accepts all types of sliced bread, including flapjacks and similar products, such
as croissants and pastries.
5. CLEANING AND MAINTENANCE
• Unplug the toaster from the mains supply and allow it to cool down completely before disassembling, cleaning,
or storing it.
• Do not immerse the toaster, cord, or plug in water or any other liquid.
• Do not clean the inside of the toaster, as it may damage the heating elements.
• Do not use a metal scouring pad, abrasive materials, metal polish, harsh chemical cleaner, or hard objects to
clean any surface of the toaster.
• Wipe the outside surfaces of the toaster with a soft cloth or sponge and mild detergent.
• Remove the remaining crumbs after each use.
11
EASYTOAST BASIC