Publicidad
Idiomas disponibles
Idiomas disponibles
Step 10
Open the door (C) and place the propane gas tank
(not included) into the tank housing (D)�
Step 11
Turn the cylinder valve on the tank clockwise to
close the propane tank� Attach the regulator (I) to
the cylinder valve by turning the regulator coupling
nut clockwise� Make sure it is fastened securely and
tighten connections by hand only�
WARNING
Please inspect the rubber O-ring in the
propane tank valve to ensure it is not worn
before attaching regulator. Worn rubber
O-rings can cause leaks, explosions and
serious injury by propane tank.
Step 12
Unscrew and remove the cap on the electronic
igniter (K), then slide the battery (L ) into the battery
slot� Make sure the positive side of the battery faces
outwards� Screw the electronic igniter cap (K) over
the battery tightly�
ASSEMBLY INSTRUCTIONS
C
Cylinder valve
Black coupling nut
turn clockwise to connect
Regulator
I
Rubber o-ring
D
Pressure relief valve
Bleed-off valve
Turn clockwise
to reseal
K
L
12
Publicidad
