cecotec CLEANFRY LUXURY 4000 Manual De Instrucciones página 36

ENGLISH
Buttons and light indicators
Power button: Light & on/off/confirmation
Mode button: Light & mode setting
Time button: Light & time setting
Temperature button: Light & temperature setting
Standby mode
The deep fryer will emit a single "beep" for 1 s and the display will show "P001". The Mode
button light will also flash.
Mode selection
1. Press the Mode button in Standby mode to select the desired mode. The display will show
programmes 1 to 5 (P001-P005).
Press it again and the display will show "P001".
Note
Each mode has a matching preset time and temperature, please check the section "Preset
Time and Temperature".
2. Press the Temperature button in Standby mode. The display will show the preset
temperature and the temperature button light will turn on.
Press the Temperature button once to increase the temperature by 5 ºC.
Use the Temperature button to adjust the temperature from 110 ºC to 190 ºC.
When the temperature selection reaches 190 ºC, press the Temperature button again and
the temperature will revert back to 110 ºC.
3. Press the Time button in Standby mode and the display will show the preset time and the
corresponding time button light will turn on.
Press the Time button once to increase the time by 1 min.
Use the Time button to adjust the time from 1 min to 99 min. When the time selection
reaches 99 min, press the button again and it will revert back to 1 min.
Shape
NN:XX (N refers to min, X refers to no display).
Throughout the whole process, the digital display will show 0.5 s which means the appliance is
in operation. 0.5 s will flash on the display indicating that it has stopped operation.
CLEANFRY LUXURY 4000/BLACK/DARK
36