cecotec CLEANFRY LUXURY 4000 Manual De Instrucciones página 37

Freidora digital de 4,2 litros, con elegante diseño en acero inoxidable e incorpora 5 programas

Idiomas disponibles

Heating mode

After selecting a mode, press the ON/OFF button and the display will show the current oil

temperature. The buttons will light up. The device will start the heating process.

2. During the heating process, press the Mode button. Notice that there is no change on the

display or the setting. Press the Time button and the display will show the preset time.

Press the Temperature button to show the preset temperature.

3. During this process, the buttons will remain on and the display will not flash.

Note

The display will show the current temperature for 5 s without you having to press any button.

Waiting mode

Once the oil reaches the preset temperature then the deep fryer will "beep" (beep 0.3 s, stop

0.3 s). The panel will display the current temperature. Should the deep fryer be left without any

selection for 1 min then it will automatically switch to standby mode.

Frying mode

After entering the Waiting mode, press the ON/OFF button. The deep fryer will stop

beeping. The set time will show up on the display. The ready light will turn on.

Time format

N:XX or NN:nn (N refers to the remaining minutes, n refers to the remaining seconds, X refers

to no display). Time precision requirements ±3 %.

2. During the frying process, press the Time button and the display will show the preset time.

The time button will light up. Press the Temperature button and the display will show the

preset temperature. Should the deep fryer be left without any selection for 5 s then it will

automatically switch to the countdown timer.

3. Once the fryer reaches the required preset temperature, the heating element will switch

off. If the oil temperature drops to lower than the preset temperature 7±3 °C, the heating

element will automatically turn on again to reach the required preset temperature. The

display will show the countdown timer.

4. Once the deep fryer has reached the end of its preset time, it will emit ten beeps (beep 2 s,

stop 1 s). It will stop heating and then enter Standby mode.

5. Press the ON/OFF button when the fryer is working, and the deep fryer will stop the heating

process. The display will show the default code and switch to setting mode.

CLEANFRY LUXURY 4000/BLACK/DARK

ENGLISH