cecotec GRAND KATANA 18 TOTAL DESTROY W Manual De Instrucciones página 14

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1.
1. Main body
2. Knob
3. Blade holder
Total Destroy blade
4.
5. Glass blending jar
6. Lid
7. Liquid pouring top
Measuring cup
8.
Fig. 2
9. Opening
Close
10.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
- Wash and dry the blender and all parts that come into contact with food carefully before
use. Then, place the blender on an even, firm, and dry surface.
3. OPERATION
1. Plug the device into a power supply.
Turn the selector to the left (counterclockwise) to select PULSE mode.
2.
3. Turn the selector to the right (clockwise) to select the desired speed setting: 1-5.
26
GRAND KATANA 18 TOTAL DESTROY W
GRAND KATANA 18 TOTAL DESTROY B
4. CLEANING AND MAINTENANCE
Cleaning
- To clean the blades properly, first rinse the jug with water. Fill the jug with 400 ml of
lukewarm water and add some detergent soap. Close the jug with the lid and run the
machine in PULSE mode for 2 seconds at a time. Repeat the process as many times as
necessary.
- To finish cleaning the blender, turn the power knob to the "0" position, turn the switch off
and unplug the appliance after each use and before cleaning.
- Use water to clean the jug. Do not use chemical or harsh abrasive cleaning agents.
- Never submerge the motor base or the blade holder in water.
- Use a dry, soft cloth to clean the motor base. Do not clean this part with a wet cloth.
Maintenance
If the product does not operate normally, produces uncommon noises or shakes more than it
normally does, stop using the product and contact the Technical Support Service of Cecotec for
reparation. Do not carry out maintenance tasks yourself.
Storage
- After cleaning the device, make sure it is thoroughly dried before storing it.
- After using the product, store it in a dry, safe place.
- Avoid direct exposure to sunlight
- Make sure it is stored in a place out of the reach of children.
5. TECHNICAL SPECIFICATIONS
Product: Grand Katana 18 Total Destroy W/Grand Katana 18 Total Destroy B
Product reference: 03983/03984
Nominal voltage: 220 - 240 V
Rated frequency: 50/60 Hz
Rated power: 1800 W
1.8-L capacity jug
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
6. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the
product and/or batteries must be disposed of separately from household
ENGLISH
27
GRAND KATANA 18 TOTAL DESTROY W
GRAND KATANA 18 TOTAL DESTROY B