Costway TS10057 Manual Del Usuario página 3

Trike frame x1
Subsidiary push rod x1
Installation Instruction
figure 1
1. As shown in figure 1, pull up
the head of the trike until hearing
the sound of click which means
the head is fixed.
3. Pedal assembly and disassembly:
As shown in figure 3, insert the pedal into the
hole of front wheel. The sound of click can be
heard which means the pedal is fixed.
Note: There are two positions of the pedal
connecting to the front wheel.
Outer position: this position is for child to place
their feet on the pedal so the parent can push
the trike.
Inner position: the pedal can drive the front
wheel in this position, so child can drive.
Handlebar x2 Back leg fixed rod x1
Pedal x2
figure 2
2. As shown in figure 2, insert the
handlebar into the left and right hole of
the head. Insert the leg fixed rod into
the hole like the figure shows. This can
be used as balance bike.
04
Back leg folding button
4. As shown in figure 4, first take out the fixed
rod, then press down the folding button to fold
or unfold the back leg.
figure 4
figure 5
5. As shown in figure 5, press
down the button next to the
wheel, then rotate the wheels
outwards.
figure 7 figure8
7. As shown in figure 7, take out the cover before inserting the push rod, the sound of
click can be heard after fixing well. As shown in figure 8 and figure 9, this mode is for
parents push.
figure 6
6. As shown in figure 6, insert the
fixed rod into the hole on the leg
before start using. This mode is for
child driving.
figure9
05