Publicidad
OPERATION
HOW TO DISCONNECT
THE TRANSMISSION
To push the unit, use the automatic drive disconnect to release
the transmission.
(Figure 9)
1.
The engine must be off.
2.
The automatic
drive disconnect
is located under the left side
of the seat deck next to the hydrostatic transaxle.
3.
To release the transmission and push the unit, pull and twist the
automatic
drive disconnect..
Latch the automatic
drive dis-
connect
in the PUSH position (Figure 9). The transmission
is
now released and the unit can be pushed.
NOTE:
In cold weather,
the heavy
viscosity
oil in the
transmission
will make the unit difficult
to push.
4.
To engage the transmission, unlatch the automatic
drive dis-
connect.
The transmission is now connected and ready to op-
erate.
Automatic Drive Disconnect
DRIVE POSITION
/
Automatic
Drive Disconnect
PUSH POSITION
Figure
9
F-050610L
14
Publicidad
