The universal recycling symbol, logo, or icon is an
internationally recognized symbol used to designate recyclable
materials. The recycling symbol is in the public domain and is not a
trademark.
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with
your local Authority or local store for recycling advice.
Separate collection / Check your local municipal guidelines.
PARTS DESCRIPTION
1. On / Off switch
2. Display
3. On/off button
4. WiFi button
5. + button
6. – button
7. Timer button
8. Heating indicator
9. Wall bracket
10. Heater
11. Feet
INSTALLATION
Wall mounting
•
Please note that the product must be installed at least 15 cm
from the floor and 50 cm from the ceiling.
•
The heater must be mounted at 4 points, ensure there is a
300mm clearance on all sides of the heater.
•
Measure the distance between the centre of each bracket both
horizontally and vertically to ensure drilling holes in the correct
place. Mark the positions of the 4 holes to be drilled on the wall
(1).
•
Drill the holes in the wall (2), then insert the plastic expanded
plugs (3) and screw the 4 supplied screws into the plastic
expanded plugs (4).
•
Attached the panel heater onto the screws and move the heater
to the left so that the screws drop into the securing slots (5).
Instruction manual
EN
5