Publicidad
Idiomas disponibles
Idiomas disponibles
• If fuelspills,waituntilit evaporates before starting
engine.
• Takeallpossible precautions whenleaving the
Edger u nattended o rduringtransport.Stopthe
engine.
• Donotoverload theEdger c apacity byattempting
totilltoodeepattoofasta rate.
Maintenance
/ Repair / Adjustments
Safety / Storage
• Follow maintenance instructions given in Manual.
• Do not change the engine governor settings or
overspeed the engine.
• To reduce the risk of fire, do not allow excessive
grass, leaves, or grease to accumulate on the
product.
• After striking a foreign object, stop the engine.
Remove the wire from the spark plug, and keep the
wire away from the plug to prevent accidental
starting. Thoroughly inspect the Edger for any
damage. Repair the damage before restarting and
operating.
• Do not operate product with a damaged or
excessively worn cutting member.
• Have repairs made by a qualified dealer or
repairman. See that only identical replacement
parts are used.
• If Edger should start to vibrate abnormally, stop
engine and check immediately for the cause.
Vibration is generally a warning of trouble.
• Stop the engine whenever you leave the operating
position. Also, disconnect the spark plug wire
before unclogging the blade and when making any
repairs, adjustments, or inspections.
• When cleaning, repairing, or inspecting, shut off the
engine and make certain all moving parts have
stopped. Remove the wire from the spark plug, and
keep the wire away from the plug to prevent
accidental starting.
• Never attempt to make any adjustments while the
engine is running.
• When not in use, disconnect spark plug lead and
store product indoors in a dry place locked or
otherwise inaccessible to children.
• SAVE THESE INSTRUCTIONS
Publicidad
