Descargar Imprimir esta página

Hydrofarm autopilot APC8400 Manual De Usuario página 2

Controlador digital de co2 con sensor integrado

Publicidad

Idiomas disponibles

Idiomas disponibles

OVERVIEW
Thank you for purchasing the Autopilot Digital CO
are packaged and shipped with the utmost care. In the unlikely event that your item is incorrect,
incomplete, or unsatisfactory, please contact Hydrofarm and we will resolve the issue.
PACKAGE CONTENTS
CO
Controller Unit
2
Socket Unit
User Manual
Screws
WARNINGS
• To ensure safe operation, please read this manual carefully before installation and follow the
instructions.
• Store this manual in a secure place for future reference.
• WARNING: CHOKING HAZARD - Accessories contain small parts.
FEATURES AT A GLANCE
• CO
enrichment or CO
2
• Controls and monitors CO
• Easy to setup and operate.
• Integrated sensors with day/night detection
• Data-logging chart with adjustable time display
• 2-Channel Low Drift NDIR Sensor
• ETL listed
OPERATING INSTRUCTIONS
Initial Setup: When first unboxing, plug the piggyback into the power socket. If successfully connected,
three things will happen while booting up:
1. Alarm will beep once.
2. Chart display will show the current software version & "Warm Up."
3. Main display will show a countdown from 10.
Once the countdown is complete, your product is ready to use. No additional setup or calibration
is needed.
APC8400 - USER MANUAL
exhaust
2
from 0 to 5000 parts per million (PPM)
2
Controller with Integrated Sensor! Our products
2
2

Publicidad

loading