Publicidad
Idiomas disponibles
Idiomas disponibles
Charge the Battery
The first charge will take about 12 hours.
1.Insert the charger connector into the charger port.
2.Plug the charger into a standard 120V or 230V wall outlet.
3.After charging it complete( at least 8-10 hours, but not more than 24 hours, with first
charge taking about 12 hours)unplug the charger from the wall outlet and unplug
the battery connector from the charger port.
• Plug the battery connector into the charger port.
• Plug the charger Into a standard wall outlet. The charger may feel warm during
charging.
• Only use the 6 volt charger to charge your 6 volt battery.
• Note: if power flow to the wall outlet is controlled by a switch , make sure the
switch is "ON"
• Before first-time use, charge the battery for at least 12 hours. Never charge the
battery longer than 24 hours.
• Recharge the battery for at least 8-10 hours after each use of your vehicle.
• Do not charge or store battery upside down. Charging produces explosive gases.
Charge away from flames, sparks and lit cigarettes. Charge in a well ventilated
area.
• Once the battery is charged, disconnect the battery connector from the charger
connector. Unplug the charger from the wall outlet. The battery is now ready to be
installed in your vehicle. Please see the following Battery installation Section for
detailed instructions on installing your vehicle:
Battery Replacement
Take out the seat and insert the wire terminal
to the connector, check other electric wires
to make sure all is connected well.
5
Publicidad
