Publicidad
Idiomas disponibles
Idiomas disponibles
Front wheel installation:
● Turn the bottom of the toy car up as above picture show.
● First put a axle sleeve and a gasket into the wheel.
● Push the wheel to the front axle.
● Put a axle sleeve and a gasket, then tighten them with a nut.
● Insert the Wheels cover.
● The other wheel to be installed as the same way.
Driving wheel installation
● Connect the terminal of the steering wheel to terminal of the instrument panel , put
the wire back to instrument panel if they are too long.
● Make the two holes of the driving wheel connect with the holes in the instruments
panel, and then tight M5 nut well with M5*35 round nut.
17
Publicidad
