CRAFTSMAN
FU LL WAR RANTY
If this Craftsman product fails due to a defect in material or workmanship within two years from the date of purchase, return it to any Sears
store, Parts and Repair Service Center, or other Craftsman outlet in the United States for free repair (or replacement if repair proves impossible).
This warranty applies for only 90 days if this product is ever used for commercial or rental purposes.
This warranty covers ONLY defects
in material
and workmanship.
Sears will NOT pay for:
•
Expendable items that can wear out from normal use within the warranty period, such as cutting line, air cleaner or spark plug.
•
Repairs necessary because of accident or failure to operate or maintain the product according to all supplied instructions.
•
Preventive maintenance,
or repairs necesary due to improper fuel mixture, contaminated
or stale fuel.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
APPLICATIONS
As a trimmer:
•
Cutting grass and light weeds.
•
Edging
Muffler
Decorative trimming around trees, fences, etc.
Spark Plug
On/Off
Stop Control
D=Handle
Starter
Rope Grip_
Shaft Grip
Fuel Cap
Choke
Lever
Attachment
Shaft
Throttle
Control
Cutting
Head Shield
Air Filter
Cover
Primer Bulb
Line Cutting
Blade
®
Hassle FreeRPLUS Cutting Head
ADJUSTING
THE D-HANDLE
1.
Loosen the screws on the
D-handle (Fig. 1).
Shaft Grip
2.
While holding the unit in
_-.,_TJ
the operating position
(Fig. 12), position the D-
handle to the location
that provides you the best
grip.
,v,,;,,in.U,,, _
3.
Tighten the clamp screws
evenly, until the D-handle
Screws (4)
I_mndle
Bottom
Clamp
is secure.
Fig. 1
INSTALL LINE TRIMMER
ATTACHMENT
NOTE:
To make installation easier, place the unit on the ground or
on a workbench.
1.
Turn knob counterclockwise
to loosen coupler (Fig. 11).
2.
While firmly holding attachment, push it straight into the coupler
until the release button snaps into the primary hole (Fig. 10).
NOTE:
Aligning the release button with the guide recess (Fig. 9) will
help installation.
3.
Turn the knob clockwise to tighten.
LINE TRIMMER
APPLICATIONS
Cutting grass and light weeds; edging; and decorative trimming
around trees, fences, etc.