Publicidad
Idiomas disponibles
Idiomas disponibles
opeRatinG tipS
In the AUTO position, the fan will adjust higher or lower with the
heating element to maintain the set temperature.
In larger spaces, your Vornado® Heater, will function most effectively
with the FAN switch set to HIGH or CONT. In the HIGH or CONT.
position, the vortex beam of air will gently keep the air circulating in
the room for even, uniform heating.
Your heater can function as a personal fan for cooling. Set the
THERMOSTAT to FAN ONLY and select CONT. with the FAN button.
Your heater, like any other 1500 watt electric heater, draws up to
12.5 amps of electric current. If using your heater on HIGH HEAT
causes your home's circuit breaker or fuse to trip, we offer the following
suggestions:
Try turning off other electrical appliances that run on the same
circuit as your heater.
Run your heater on LOW HEAT.
Have your electrician add an additional circuit to your home's
electrical system.
When the room temperature is higher than the set temperature, it is
normal and correct to have little to no heat coming out of your AVH4.
When the unit is first turned on, there is a slight delay before
heat will start to be produced.
ALWAYS USE COMMON SENSE WHEN USING THIS AND/OR
ANY ELECTRICAL APPLIANCE.
All manuals and user guides at all-guides.com
adVanced SafetY featuReS
TIGHT GRILL SPIRALS
Resists curious fingers.
COOL TOUCH CASE
Safe to touch, even on high heat setting.
AUTOMATIC SAFETY SHUT OFF SYSTEM
If airflow becomes blocked and overheating occurs,
power to the heating element and fan is shut off.
AUTOMATIC TIP-OVER PROTECTION
If tipped over, power to the heating element and
fan motor is reduced to prevent overheating.
IDEAL 120°F EXIT AIR TEMPERATURE
Warm enough to heat an entire room.
English 7
Publicidad
