Publicidad
Idiomas disponibles
Idiomas disponibles
bicycle.
5. Repeat for the other side. Insert the bolts (B1) at both ends and tighten them on the shaft
by turning the 15 mm combination spanner clockwise. Finally, make sure that the wheel is
securely attached to the frame.
Assembling the pedals. (Fig. 6).
-
Check the marking indicating the left pedal and the right pedal. You will find stickers
indicating this.
-
To mount the pedals, the right pedal must be screwed clockwise, and the left pedal must
be screwed counterclockwise with the 15 mm spanner.
Assembling the battery. (Fig. 7).
1.
The electric bike comes with a removable battery. Remove it from the box carefully.
Before sliding the battery down onto the controller, make sure that the battery slots are
correctly inserted and then secure it firmly.
2. Once in place, insert the spanner into the hole on the left side of the battery. Turn the
spanner clockwise to fix the battery in its place.
3. Press the button on the front end of the battery to ensure that the power supply is
connected and functioning properly.
4. OPERATION
The electric bicycle will start assisting with electric power once you start pedalling.
Fig. 8 key:
1.
Power button
2. Light button
3. Assistance setting button
4. Assistance level indicator lights
5. Battery level indicator light
Control panel
-
Switching on: 1 short press on the power button.
-
Switching off: 1 short press on the power button.
-
Light: 1 short press on the light button.
-
Pedestrian mode: press and hold the assistance setting button to activate the pedestrian
mode. This mode will help you to carry the bike when walking as it will go at 6 km/h
without the need for pedalling.
-
Assistance level: short press the assistance setting button to switch between the
different assistance levels:
1.
Low
ENGLISH
MTB
77
Publicidad
