Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: Sharp corners and small grooves will only be partially
duplicated by the copy crafter. The follower assembly will
need to be removed. Using calipers, transfer measurements
from original to duplicate, and clean up grooves and corners
using fine adjustment screw on carriage.
MISCELLANEOUS OPERATIONS
• The copy crafter can also be used to taper workpieces.To
do this, offset the tool rest bases.
• The copy crafter can be mounted across the bed for copying
of bowls, cups, etc. by repositioningtool rest bases.
• The copy crafter can trace a template as well as an original
spindle.
• The template represents the profileof the post measured
from its centedine.
•
The measurements of the post are transferredto a suitable
material such as '/," plywood laid out and cut on a band,saw
or scrollsaw.
•
The template is then bolted to the pattern supports,parellel
to the lathe bed.
•
Figure 12 on page 7 shows an example br usinga template.
WARNING:
Make certain that the lathe is disconnectedfrom
power source before attempting to service or remove any
component.
CLEANING
Keep machine and workshop clean. Do not allow sawdust to
accumulate on the tool.
Use soap and water to clean painted parts, rubber parts and
plastic guards.
LUBRICATION
The shielded ball bearings in this tool are permanently lubri-
cated at the factory. They require no further lubrication.
KEEP TOOL IN REPAIR
Replace any damaged or missing parts. Use parts list to
order parts.
=19.05
[07'5]
_4L628
[1.641
¢I6
724
COGG]
[1 3]
43778
[172]
28
8134
t2.7
[0.50_
¢,11112
[0441
,_292]
[115]
¢34
'925
[1373
'a40005
C157]
_32.004
[1.26]
,1,27 94
[1¸101
_ 16064
[063]
_2794
_110_
,_29.2_
It
1_3
\
/-
64991
[2.561
132
678
[5_2]
156.078
[(= 22]
] 75.26
[6903
182_8
[720]
199¸689
[786_
2197t
[865]
Z268_t
[869J
224
79
[8853
m254
c]oo]
37.8_4
C149_
=190_
[0751
[020]
127
C0503
_8.5
[0.335]
.19.05 [0.75]
19.05 C0.7
I
W
[.,_
Figure 12 - Using a Template
250.19
[9,85]
7
Publicidad
