cecotec BIGDRY 10000 EXPERT CONNECTED Manual De Instrucciones página 62

ENGLISH
The dehumidifying
function does not
work
Air does not come out
The appliance makes
strange noises during
operation
Display shows the
error code "E1"
1. Service information
1.1 Area verification
Before starting work on systems containing flammable refrigerants, safety checks are
necessary to ensure that the risk of ignition is minimised. Before repairing the cooling system,
the following precautions must be observed:
1.2. Work procedure
The work must be carried out in accordance with a controlled procedure to minimise the risk
of a flammable vapour or gas being present while the work is being carried out.
62 BIGDRY 10000 EXPERT CONNECTED
Is the filter clogged?
Is the intake duct or discharge
duct obstructed?
Is the filter clogged?
Is the device tilted?
Is the filter clogged?
There has been an error
or short-circuit in the
temperature or humidity
sensor.
Clean the filter grille according to
the cleaning instructions of the
dehumidifier.
Remove the obstruction from the
discharge duct or intake duct.
Clean the filter grille as described
in the section "Cleaning and
maintenance."
Place the device on a flat and
stable surface.
Clean the filter grille as described
in the section "Cleaning and
maintenance."
Temperature sensor error
Contact the Technical Support
Service.