Teka HO-625 Guía De Uso página 15

3172875-000 EPIFA 27/02/15 09:07 Página 15
Caution
The electronic clock features Touch-Control
technology. To operate, simply touch the glass
control symbols with your fingertip.
The touch control sensitivity continuously
adapts to ambient conditions. Make sure the
glass surface of the control panel is clean and
free of obstacles when plugging in the oven.
If the clock does not respond correctly when
you touch the glass, unplug the oven for a few
seconds and then plug it in again. Doing this
causes the sensors to adjust automatically so
that they will react once more to fingertip con-
trol.
Setting the time on the Electronic Clock
When the oven is connected to the power supply,
the indication 12:00 flash on the display. Press
or to set the time on the clock. The clock
beeps twice to confirm the selected time.
If you wish to modify the time, press
until the current time flash on the screen.
Press . Then press
the time. The clock beeps twice to confirm the
modification.
Manual Operation
The oven is ready to be used when the clock
has been set. Select a cooking function and a
temperature.
When you begin cooking, symbol
up to indicate that the oven is heating the con-
tents; the symbol
selected temperature is reached.
Set the controls to
Functions of the Electronic Clock
Alarm: Creates an alarm signal when the peri-
od of time finishes; the oven does not need to
be in use in order to use this function.
Cooking Time: To cook for a selected length of
time; the oven turns itself off automatically
when the time finishes.
Use of the Oven
or
or to modify
lights
goes out when the
to turn the oven off.
End Cooking Time: To cook until a set time;
the oven turns itself off automatically when the
time finishes.
Cooking time and End Cooking Time: To cook
for a selected length of time and end at a set
time. When this function is set, the oven
comes on automatically at the time required in
order to cook for the set length of time
(Cooking time) and end automatically at the
indicated time (End Cooking Time)
Child Safety Function. This function locks the
electronic clock, preventing small children from
playing with it.
Programming the Alarm
1 Press until symbol
.
2 Set the period of time after which you wish
the alarm to sound by pressing
3 The clock beeps twice and symbol
lights up permanently to indicate that the
alarm has been set.
4 When the set period of time comes to an
end, the alarm sounds and symbol
starts to flash.
5 Press any button to stop the alarm; symbol
goes out.
You can consult the remaining time at any
moment by pressing
flashes and then pressing
also modify the set time at this point by press-
ing or . The clock beeps twice to con-
firm the change.
Setting the Cooking Time
1 Press or until symbol
Press .
2 Select the period of time you wish to cook
for by pressing or
3 The clock beeps twice and symbol
lights up permanently to indicate that the
oven will turn itself off automatically.
4 Select a cooking function and temperature.
lights up. Press
or .
or until symbol
. You can
lights up.
.
15