Hurricane HEKE 18-35 Manual De Instrucciones Original página 23

Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Mains voltage: ........................ 230-240 V ~ 50 Hz
Power rating: ........................................... 1800 W
Cutter rail length: .................................... 350 mm
Cutting length, max.: .............................. 325 mm
Cutting speed at rated rpm: .......................13 m/s
Oil tank capacity: .......................................120 ml
Weight with cutter rail and chain: ...................5 kg
Protection class: ...........................................II /
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ........................ 94 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ........................ 105 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Handle under load
Vibration emission value a
K uncertainty = 1.5 m/s
Warning!
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
Anl_HEKE_18_35_SPK7_Teil1.indb 23 Anl_HEKE_18_35_SPK7_Teil1.indb 23
GBR
= 6.99 m/s
2
h
2
- 23 -
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
5. Before starting the equipment
Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Always pull the power plug before making
adjustments to the equipment.
Caution: Do not connect the chainsaw to the po-
wer supply until it has been fully assembled and
the chain tension has been adjusted. Always wear
protective gloves when working on the chainsaw
to protect yourself against injury.
5.1 Assembly of the cutter rail and the saw
chain
•
Carefully unpack all parts and check that they
are complete (Fig. 2).
•
Undo the fixing screw of the chain wheel co-
ver (Fig. 3).
•
Take off the chain wheel (Fig. 4).
•
Lay the chain as shown in the groove which
runs around the cutter rail (Fig. 5/Item A).
•
Insert the cutter rail and chain as shown in
the mounting in the chainsaw (Fig. 5). At the
same time guide the chain around the chain
wheel (Fig. 5/ Item B).
•
Attach the chain wheel cover and secure it
with the fixing screw (Fig. 6a+6b+6c). Cauti-
on: Do not fully tighten the fixing screw until
after adjusting the chain tension (refer to point
5.2).
16.05.12 14:31 16.05.12 14:31