Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
(Original instructions)
1
Red indicator
2
Button
3
Battery cartridge
4
Star marking
5
Indicator lamps
6
Check button
7
Switch trigger
8
Lamp
SPECIFICATIONS
Model
Capacities
–1
No load speed (min
)
Blows per minute
Overall length
Rated voltage
Battery cartridge
Net weight
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-Pro-
cedure 01/2003
Intended use
The tool is intended for impact drilling in brick, concrete
and stone. It is also suitable for screw driving and drilling
without impact in wood, metal, ceramic and plastic.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
4
Explanation of general view
9
Reversing switch lever
10 Speed change lever
11 Action mode changing ring
12 Adjusting ring
13 Graduation
14 Arrow
15 Sleeve
16 Groove
Concrete
Steel
Wood
Wood screw
Machine screw
High (2)
Low (1)
High (2)
Low (1)
BL1815 / BL1815N / BL1820 /
ENE079-1
GEA010-1
17 Hook
18 Screw
19 Bit holder
20 Bit
21 Vent
22 Blow-out bulb
DHP459
13 mm
13 mm
38 mm
6 mm x 75 mm
M6
0 – 1,500
0 – 400
0 – 22,500
0 – 6,000
192 mm
D.C. 18 V
BL1820B
1.5 kg
CORDLESS HAMMER DRIVER DRILL SAFETY
WARNINGS
1.
Wear ear protectors when impact drilling. Expo-
sure to noise can cause hearing loss.
2.
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
4.
Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
5.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
6.
Hold the tool firmly.
7.
Keep hands away from rotating parts.
8.
Do not leave the tool running. Operate the tool
only when hand-held.
BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B /
BL1860B
1.7 kg
GEB056-5
Publicidad
