Assembly; Attaching The Starsense Camera To Your Telescope - Celestron StarSense AUTOALIGN Manual De Instrucciones

ASSEMBLY

ATTACHING THE STARSENSE CAMERA TO
YOUR TELESCOPE
1. Remove the fi nderscope and bracket from your
telescope tube .
Note: Some optical tubes, like the NexStar SE, may have
a small plastic rail which secures the Star Pointer .
Remove this rail with a Phillips head screwdriver .
Remove StarPointer
2. Using the Optical Tube Compatibility Chart on
page 7, identify whether your telescope accepts
the small or large camera base .
Large Base
Using a Phillips head
screwdriver, install the
appropriate base on your telescope .
Installing base with Phillips screwdriver
8 I
Small Base
3. Slide the StarSense camera onto the camera
base and secure it with the thumbscrew(s) . The
camera slides on the large base front to back,
and slides on the small base back to front .
Installing large base (front to back)
Installing small base (back to front)