1 - Function switch:
0 Off
1 minimum heating
2 maximum heating
2 - Adjustable thermostat
3 - Operating indicator light
4 - Supports (2 pieces)
5 - Wheels (4 pieces)
Technical data indicated on the appliance.
SUPPORTS ASSEMBLY.
Before performing any assembly operation, make certain that the
appliance is switched off and disconnected from the power outlet.
Insert the wheels by pushing them inside the holes placed on the bottom
of supports (fig. 1).
Turn the appliance over, unscrew the 4 screws placed on the bottom of
the product and place the supports (with the fixed wheels) matching the
holes with those on the appliance.
Fix the supports with screws (fig. 2).
USER INSTRUCTIONS.
To turn on the appliance, insert the plug into the power outlet, set the
operation switch in the desired position and turn the adjustable thermostat
clockwise to the maximum position.
Once the desired room temperature is reached, turn the handle slowly, in
a counter clockwise direction, until the appliance is turned off.
At this point, the product will automatically restart when the temperature
in the room goes below the set limit.
The indicator light indicates that the appliance is operating and will switch
off when the adjustable thermostat is activated.
The appliance is equipped with an automatic turn-off system in case it
falls over accidentally.
Before connecting or disconnecting the appliance, make certain that all
the switches are in the off position.
Before replacing the appliance in its packaging, check that it has cooled
sufficiently.
16
Technical informations
Instructions for use
GB
GB