GE 21 Manual Del Propietario E Instalación página 16

Trimkits and decoratorpanels.
For CustomStyle rMmodels
Read these instructions completely and carefully.
Before YouBegin
Some models are equipped with trim kits that aflow you to install door panels. You can order pre-cut
black, white, almond, bisque, or stainless steel decorator panels from GE Parts and Accessories,
800.626.2002, or you can add wood panels to match your kitchen cabinets.
Panels less than 1/4" (6 mm) thick
\._]]en installing wood panels less than 1/4" (6 ram) thick, you need to create a filler panel, such as 1/8"
(3 ram) cardboard, that will fit 1)etween the fi_ce of the door and the wood l)anel. If you are installing the
l)re-cut decorator panels, pre-cut filler panels are included in the kit. The combined thickness of the
decorator or wood panel and the filler panel shotfld be 1/4" (6 mm).
Panels 1/4"(6 mm) thick or less
1/4"(6 mm) Max.
3/4" (19 mm) or Raised Panel
A raised panel design screwed or glued to a ]/4" (6 ram) thick backing, or a 3/4" (] 9 ram) routed board
can be used. The raised i)ortion of the panel must be tifl)ricated to i)emfit clearances of at least 2" (5.1 cm)
fi'om the handle side fl)r fingertip clearance.
Panels thicker than 1/4" (6 ram), u I) to 3/4" (l 9 ram) ma_mtun, will reqtfire that the outer 5/16"
(8 ram) of panel perimeter be no thicker than 1/4' (6 ram).
Weight limitations for custompanels:
Fresh Food38 Ibs. (17kg)max.
FreezerDoor28 Ibs. (13kg) max.
Panels thicker than 1/4" (6 mm)
5/16"(8 mm)
1/4"(6 ram)
ThickBacking
! :nm
1i[11
I -""_ Refrigerator
Door
16