Publicidad
Idiomas disponibles
Idiomas disponibles
4. If the device is in
pairing mode, it
will appear as in
the following
image. Tap on add.
5. Before your
smartphone and
the AmbiGlow
start pairing, the
app will ask for
your WiFi address
and password.
Type both in and
then on next.
6. Then, your
smartphone and
the strip will start
pairing. Once the
pairing is finished,
tap on done.
Note:
1. For a correct synchronization with the mobile phone, it is
necessary to accept all the
accesses requested by the app.
2. When linking your phone with the device for the first time,
you must be connected to a WiFi network. Make sure that
the light flashes and that the WiFi password you have
entered is correct.
3. Only compatible with 2.4 GHZ WLAN, Android 7.0 and
above and iOS 11.0 and above. Do
not use 5G WiFi.
4. The first connection should be made close to the router to
ensure a faster connection.
5. When connecting multiple devices to the WiFi network,
do not place them too close
together as this may cause signal interference.
Publicidad
