GE 18 Manual Del Propietario E Instalación página 10

About crisper removal
Not all features are on all models.
Crisper Removal
Unloadthe bottomshelf before attempting to
remove thestorage drawers.
\,
, ToRemove:
Removing the glass cover
Lift the (lrawe_ up slightly while pulling
them past the stop location.
If the door prevents you from taking out
the drawe_s, fi_st try to remove the door
bins. If this does not offer enough
clearance, the refrigerator will need to
be rolled fin'ward tmtil the door opens
enough to slide the (h'awe_ out. In some
cases, when you roll the refi_igerator out,
you will need to move the refi_igerator
to the left or right as you roll it out.
Toremove the glass cover:
Remove the glass, then the fl'ame. \,_l_en
replacing the glass, push the fl'ont edge
firefly into the fl'ame.
0 Push up the glass cover at the teat;
Slide the glass cover backwards tmtil the
fl'ont edge corn es out of the fl'am e.
0 Rotate the side of the glass cover up.
O Remove the glass cox'e_;
i *'
' _"1_,,
Removing the frame
To remove the frame:
0 I,ifl up the fl'ont of the fl'ame using
both hands.
@ Slide the fl'ame fin'ward.
0 Rotate the side of the fl'ame up.
@ Remove the fl'ame.
About the additional features.
Not all features are on all models,
ShelfSaver
TM
Rack
This slide-out rack holds twelve cans of soda
or two wine/water bottles (lengthwise).
Can be removed fin" cleaning.
To remove, slide the rack out to the stop
position, lift the rack up and past the stop,
and lift out.
10