Publicidad
Idiomas disponibles
Idiomas disponibles
Doesn't Run
Doesn't Heat
Doesn't Dry
Properly
Is Noisy
Control Knob
Advances
Slowly
Dries Unevenly
Has an Odor
Be sure the door is shut.
Is the electrical
cord plugged in?
Has a fuse blown or the circuit breaker tripped?
Push the control dial in again if the door was opened during the cycle.
Has a fuse blown or the circuit breaker tripped?
Select a heat setting, not air fluff
Check that the gas supply is on for gas dryers.
Clean the lint filter and exhaust duct.
Dryer timer may have moved into the cool-down
portion of the cycle.
Check all of the above, plus...
Check the exhaust hood outside the house, does it open and close freely?
Check exhaust system for lint buildup.
Ducting should be inspected
and cleaned annually.
Use rigid 4" metal exhaust ducL
Do not overload. 1 wash load = 1 dryer load.
Sort heavy items from lightweight
items.
Large, bulky items like blankets or comforters
may require repositioning
to ensure even
drying.
Check the washer to be sure it is draining properly to extract water from the load.
Clothes load is too small to tumble properly. Add a few towels.
Check the load for objects such as coins, nails, etc. Remove promptly
from dryer,
It is normal to hear the dryer gas valve or heating element cycle on and off during the
drying cycle.
The dryer should be level and installed on a solid floor`
A clicking
noise may be the timer advancing.
It is normal for the dryer to hum due to the high velocity of air moving through
the dryer
drum and exhaust system.
Thisis normal operation
for an Auto Dry cycle, especially
at the beginning
of cycle. Once
the load begins to dry, the control knob will start to advance. The rate of advancement
will
be slow at the beginning
of the cycle because there is more moisture
in the load. As the
load becomes more dry, the control knob will advance more quickly.
Seams, pockets and other similar heavy areas may not be completely
dry when the rest of
the load has reached the selected dryness level. This is normal. Select the More Dry
setting if desired.
If one heavy item is dried with a lightweight
load, such as one towel with sheets, it is
possible that the heavy item will not be completely
dry when the rest of the load has
reached the selected dryness level. Sort heavy items from lightweight
items for best drying
results.
Household
odors such as from painting, varnishing,
strong cleaners, etc. may enter the
dryer with the surrounding
room air. This is normal as the dryer draws the air from the
room, heats it, pulls it through the tumbler and exhausts it to the outside. When these
odors are present in the air, ventilate the room completely
before using the dryer`
Publicidad
