Publicidad
Card
Carte
Replacing Agitator
>- When the bristles on the agitator are
worn so that they do not touch a card
held across the lower plate, the
agitator should be replaced.
>- Remove lower plate and agitator.
>- Position belt over belt pulley on the
new agitator.
>- Reinstall agitator and lower plate.
Agitator Assembly
Brush
Unit
End Cap
End Cap
Belt Pulley
Cleaning
Exterior
Unplug cord from wall outlet.
Clean exterior using a clean, soft cloth that has been dipped in a solution of mild
liquid detergent and water and wrung dry.
DO NOT drip water on vacuum cleaner, wipe dry after cleaning.
DO NOT clean tools in dishwasher or clothes washer.
Wash tools in warm, soapy water, rinse and air dry.
DO NOT use tools if they are wet.
- 32 -
Publicidad
