GE FUM14 Manual Del Propietario Y Instalación página 5

About the operationof yourfreezer, ge.com
Startingthe Freezer
_] Clean the inside of the fl'eezer with a mild solution oI baking soda and water (see Care and C/oaning).
]Connect cord to power outlet.
_]On models with a Temperature Monitor or High-Temp .Maml Switch, set tile switch to tile OFFp(>sifi(m.
[_ Make sure tile temperature control is set at 4.
_] ,Mlow fl'eezer to operate for at least four houi_ befi)re plating food inside.
_]On models with a Temperature Monitor or High-Temp _Maml Switch, set tile switch to tile 0Nposition.
Temperature Control
Freezing temperature selection is made by
setting the control fl'om Ito 7 (coldest).
If you want colder or wamler temperatures,
a(!itlst tile control one step at a time.
_Mlow several hom_ alter each one-step
a(!iustment for tile freezer temperature
to stabilize.
Turning tile control to OFFstops tile cooling
process but does not shut off power to tile
freezer.
Located on back of lid.
"___, _ Llil_ilct_ [° r
\ On 3fl
Switct
High-Temp Alarm Switch {onsomemodels)
An alaml will sotmd if the fi'eezer
temperature reaches tmsafe levels.
Tile alaml operates on household
electricity. If the power tifils, the alaml
will not i)erfimn.
An ON/OFFswitch allows tile temperature
alam/ to be deactivated if desired. Tile
fl'eezer is shii)ped with the switch in the
OFfposidon. _MieI" tile freezer has i'tln
long enough to lower tile temperature,
you may set tile switch to tile 0Nposifion.
CAUTION: Adding more than 3 pounds {1.5 kg)
of warm food per cubic foot of freezer capacity
can trigger the alarm.
Toactivate the alarm, set tile switch to tile
ONp(>sifion.
Todeactivate the alarm, set tile switch to tile
OFFp(>sition.
7 ---
P0wer { Alarm Temp Alarm
Off
::
Electronic Temperature Alarm
{some Electronic Chest models)
This feature is designed to provide a warning
if the inside temperature reaches an tmsafb
level. Tile Temp _Marm feature operates on
household electricity. It will not function if
household electrici b is interrupted.
When tile fi'eezer is initially plugged in, tile
red Temp .Mann indicator light blinks. Tile
indicator light will continue to blink until
the fl'eezer has reached a safe ii'eezing
temperature. If a malfunction causes an
unsaib temperature inside tile fi'eeze_; tile
red light will blink and tile buzzer will
sound. To silence tile buzzei; press tile
AI,ARM OFF breton. Tile indicat(>r light
will continue to blink tmtil a safe fl'eezing
temperature is again reached. If tile
problem is not solved within twelve (12)
hours, tile buzzer will mrn on again. If tile
ALARM OFF button is not pressed, tile
buzzer will turn itself off aut(>matically after
48 h(/tn% but tile red Temp ,Mmm light will
continue to blink.
5