Publicidad
OBJ_BUCH-3414-001.book Page 15 Wednesday, December 20, 2017 8:15 AM
Do not touch abrasive wheels until they have cooled
down. The discs can become very hot while working.
Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for grinding and deburring metal us-
ing corundum grinding accessories.
The machine is also suitable for working with wire brushes.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Clamping nut (GGS 8 SH)
2 Protection guard (open) with locking screw (GGS 8 SH)
3 Grinder spindle
4 Mounting flange (GGS 8 SH)
5 Gripping surface (spindle collar)
6 On/Off switch
7 Quick-clamping nut
8 Clamping nut (GGS 8 H)
9 Clamping flange
10 Protection guard (enclosed) with locking nuts
(GGS 8 H)
11 Mounting flange (GGS 8 H)
12 Handle (insulated gripping surface)
13 Locking screw for protection guard
14 Holding rod
15 Two-pin spanner for clamping nut
16 Index mark
17 Snap ring
18 Locking nut for protection guard
19 Open-end spanner, size 24 mm*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Bosch Power Tools
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise levels of the product are:
Sound pressure level 87 dB(A); Sound power level 98 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745-2-3:
Surface grinding (roughing): a
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Technical Data
Straight grinder
Article number
Rated power input
Output power
Max. speed
Thread of grinder spindle
Max. spindle length
Tool holder
*
Max. grinding disc thickness
Grinding tool diameter, max.
Weight according to EPTA-
Procedure 01:2014
Restarting Protection
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Starting cycles generate brief voltage drops. Interference with other
equipment/machines may occur in case of unfavourable mains system
conditions. Malfunctions are not to be expected for system impedances
below 0.36 ohm.
English | 15
(triax vector sum) and uncertainty K
h
2
2
=3.0 m/s
, K=1.5 m/s
.
h
GGS 8 SH
3 601 B14 ...
W
1200
W
700
-1
min
7640
M 14
mm
mm
mm
mm
125
kg
1 609 92A 46N | (20.12.17)
31
20
32
4.4
/II
Publicidad
