cecotec IRONHERO 3200 I-PUMP ABSOLUTE Manual De Instrucciones página 31

Plancha horizontal con bomba

Idiomas disponibles

Dry ironing

Press the + button to select Dry Ironing mode and select "Synthetic" or "Silk-Wool". Once

selected, wait until the temperature icon stops flashing.

According to the care label of the different garments, set the correct ironing temperature

to start ironing.

Steam ironing

Unplug the iron and fill it with water following the filling-up steps mentioned in the

previous sections.

Plug the power cord into the power supply.

Select the type of fabric to be ironed on the LCD display using the + and - buttons (steam

mode can only be used in "cotton" and "linen" modes). Wait until the temperature icon

stops flashing and you can start ironing.

When finished, use the + and – push buttons to select OFF on the LCD display and unplug

the device from the power supply.

Ironing synthetic clothes

Minimum temperature and no steam operation.

When this function is selected, the display will show the temperature symbol and a

dot blinking. After a few seconds, both symbols will turn steady and the iron will beep,

indicating that it is ready to be used. (70 ºC-120 ºC).

Ironing wool/silk

Medium temperature and no steam ironing.

When this function is selected, the display will show the temperature symbol and 2 dots

blinking. After a few seconds, the symbols will turn steady and the iron will beep, indicating

that it is ready to be used. (100 ºC-160 ºC).

Ironing cotton

High temperature and steam ironing.

When this function is selected, the display will show the temperature symbol and 3

flashing dots. After a few seconds, the symbols will turn steady and the iron will beep,

indicating that it is ready to be used. (140 ºC-200 ºC).

Ironing linen

Maximum temperature and steam ironing.

When this function is selected, the display will show the temperature symbol, 3 dots and

MAX blinking. After a few seconds, the symbols will turn steady and the iron will beep,

indicating that it is ready to be used. (175 ºC-215 ºC).

IRONHERO 3200 I-PUMP ABSOLUTE

ENGLISH

01876