Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Warning
If the iron is operated before the above-mentioned symbols turn steady, the iron soleplate
could leak, as it has not reached the optimal temperature.
Steam burst
By pressing the steam burst button, an intense burst of steam is emitted from the soleplate.
This function can only be activated during high-temperature ironing.
Warning
To prevent the soleplate from leaking, do not keep the steam burst button pressed for more
than 5 seconds.
Warning
For optimal steam burst, do not press the steam burst button more than three times in a row
to prevent the iron from cooling.
Spraying
The spray function can be used with any temperature setting during the steam ironing or dry
ironing mode, as long as the tank is full.
Touch sensor
The iron includes a touch sensor in its handle. For safety reasons, the iron will only emit
continuous steam when held by the handle in a horizontal position.
Continuous steam emission
The iron features a pressure pump that generates maximum steam and removes the
1.
harshest creases.
To activate it, press the i-PUMP button once. This button is located at the top. During
2.
operation, the LED light will remain on, and a slight sound will be heard.
To deactivate it, press the button again and wait until the light turns off.
3.
Self-cleaning
Use the self-cleaning function once every two weeks. If water in your area is very hard (i.e.,
-
scales appear on the soleplate during ironing), the self-cleaning function should be used
more frequently.
Make sure the appliance is unplugged.
-
Fill the water tank up to the maximum mark and close it (do not put vinegar or other
-
treatment agents in the water tank).
Plug the device into a power supply.
-
Select the maximum temperature mode.
-
Unplug the appliance when it reaches the temperature.
-
32
IRONHERO 3200 I-PUMP ABSOLUTE
Publicidad
