cecotec IRONHERO 3200 I-PUMP ABSOLUTE Manual De Instrucciones página 30

ENGLISH
3. OPERATION
Preparation
Sort the laundry according to the international symbols on the label of the different
pieces of clothing, or the type of fabric.
Label
Start ironing the fabric that requires a lower temperature. This reduces waiting times (the iron
takes less time to heat up than to cool down) and the risk of burning the fabric.
Filling the water tank
Unplug the iron before filling the water tank.
-
Rest the iron on its heel rest, tilt it forward approximately 45º, and fill the water tank up to
-
the MAX mark.
Tap water may be used. In case water is very hard, use distilled water. Do not use chemically
-
descaled or scented water under no circumstance.
Note
Whenever you fill or empty the water tank, you must do so with the iron unplugged from
-
the mains.
Do not use additives or add other liquids such as perfume, vinegar, starch, condensed
-
water from dryers or air conditioning systems, or chemicals, as this may damage the iron.
This iron is designed to operate under running tap water. However, to ensure optimal
-
performance for longer, you can mix tap water with distilled water in a 1:1 ratio. If water in
your area is very hard, the mixture of tap water and distilled water should be in a 1:2 ratio.
Vertical steaming
Ensure there is enough water in the tank.
-
Place the steam iron in an upright position, rest it on its heel rest, and connect it to the
-
power socket.
Choose the maximum-temperature mode by pressing the + button until you reach "Linen"
-
mode. The temperature icon will start flashing. Wait until it stops.
Hold the iron vertically and press the steam burst button, an intense steam will be ejected
-
from the soleplate.
30
IRONHERO 3200 I-PUMP ABSOLUTE
Type of fabric
Synthetic
Silk - Wool
Cotton - Linen
Do not iron
Thermostat regulation
Low temperature
Medium temperature
High temperature