cecotec FOLDING Manual De Instrucciones página 83

2. Light button
3. Assistance setting button
4. Assistance level indicator lights
5. Battery level indicator light
6. Pedestrian mode button
Control panel
- In order to switch on and send power to the bicycle, you must turn the key.
- Switching on: 1 short press on the on/off button.
- Switching off: 1 short press on the on/off button.
- Light: 1 short press on the light button.
- Pedestrian mode: short press on the "6 km/h" button.
- Assistance level: one short press on "MODE" button.
1. Low
2. Medium
3. High
Charging the battery
- Only use the original charger supplied to charge the electric bicycle. To start charging,
insert the charger into the socket on the side of the battery and plug it into a power
source. The battery will fully charge in 4-6 hours.
- Be sure to follow all precautions when handling the battery:
- Keep the battery out of the reach of children and pets.
- Store the battery in a dry place without high temperatures.
- Avoid causing physical damage to the battery.
- To charge the electric bicycle, only use the charger supplied or a replacement charger
supplied by an authorised dealer.
- Ensure that the battery is securely attached to the frame before each use.
- It is recommended not to overcharge the battery.
- Charge it for 4-6 hours.
5. CLEANING AND MAINTENANCE
- It is recommended to use a damp cotton cloth or sponge instead of a hose or water jet.
- It is recommended to clean the electric bike after each use. However, you can wash it
weekly. This will help to extend the lifespan of the electric bike.
- Soaps and bike care products from specialised shops are highly recommended, as they do
not attack plastics and seals. A soap solution or liquid detergent can be used. However,
they should not be too aggressive or strongly degreasing.
- It is recommended to clean after each use to prevent dirt from taking root or, if this is not
possible, as often as possible. You can dry clean the electric bike with a cotton cloth or
ENGLISH
FOLDING 83