Publicidad
Idiomas disponibles
Idiomas disponibles
ELECTRONIC CORDLESS TYING MACHINE
3.4. NOTICE USING CORDLESS TOOL
•
Use only the charger specified by the manufacturer. Use of other charger
can damage the battery and cause risk of fire.
•
The tool is only designed for original battery. Using other battery to match
the tool can cause damage and risk of injuries.
•
Battery should be stored away from metal parts, like clip, coin, key, nail,
screw or other small metal parts. Short circuit the battery will cause fire.
•
Inappropriate usage will cause leakage of liquid. If your body is splashed
by the liquid, please flush by clean water. Must see a doctor if liquid
touches eyes. Liquid of battery will canker or burn.
3.5. PERSONAL SAFETY
•
Keep alert, watch what you are doing and use common sense while
shifting the power tool. Do not operate the power tool when you are
tired, or under the influence of drugs, alcohol or medication. A moment
of inattention when operating the power tool may cause serious
personal injury.
•
Use personal protective equipment. Always wear goggles. Safety
equipment, such as dust mask, anti-skid safety shoes, hard hat, hearing
protection and other devices used for appropriate conditions will reduce
personal injury.
•
Avoid accidental start. Carrying power tool with your finger on the switch
or plugging in power tool that have the switch ON, may cause danger.
•
Remove all adjustment keys or wrenches before the power tool is
switched ON. A wrench or key left attached to a rotating part of the
power tool may cause personal injury.
•
Do not overreach. Keep proper footing and balance at all time. This
enables better control of the power tool in unexpected situations.
•
Dress properly. Do not wear loose clothing or wear jewelry. Keep clothes,
gloves and hair away from moving parts, because of loose clothing,
jewellery or long hair may be caught in moving parts.
www.kamikazevolpi.com
90
ELECTRONIC CORDLESS TYING MACHINE
4. SPECIAL SAFETY INSTRUCTIONS
4.1. SPECIAL SAFETY INSTRUCTIONS OF THE TYING MACHINE
•
Don't remove the front cover during the tool operation. Keep any part of
your body at a minimum distance of 5 cm from the tying mouth during
tool operation. Any negligence during the operation of the tying machine
may cause personal injury.
•
After tying action is completed, hold the handle to move the tying
machine, the prudent usage of the tool will protect the operator
effectively and extend the service life of the tying machine.
4.2. OTHER SAFETY INSTRUCTIONS
Wear suitable work clothes such as boots with non-slip soles,
sturdy long trousers, gloves and goggles.
•
Do not wear long flowing clothing or jewelry, as moving parts may catch this.
•
Stay alert, watch what you are doing, and use common sense when
operating the tool. Do not use a power tool when you are tired or under
the effect of drugs, alcohol or medicines.
•
Don't use the tying machine in the rain.
•
Do not use the tool in the proximity of flammable liquids or gasses. Fire
and explosion risk exist in the event of a short circuit.
•
Do not attempt to repair the tool your-self, bring the tool to our Service
Center in case of need. All works, which are not described in this manual,
may only be performed by our Service-Centre.
•
The product is designed to tie
grape vines and other branches
within the effective range of
25mm maximum diameter.
Don't use it in all kinds of tying
work exceeding the range of
25mm maximum diameter.
The excess of this range would
damage the tying machine.
www.kamikazevolpi.com
91
Publicidad
