Kamikaze KVT9 Manual De Uso página 63

ELECTRONIC CORDLESS TYING MACHINE
9. SPECIFICATION
SPECIFICATION
Electric tying machine
1 Max tying diameter
2 Rated voltage
3 Rated power
4 Rated current
5 Current protection
6 Protection class
7 Weight
Battery (lithium)
1 Capacity
2 Voltage
3 Running hours
4 Weight (battery)
Charger
1 Rated voltage
2 Output voltage
3 Charging current
4 Protection class
5 Charging time
10. CHARGING THE BATTERY
Never expose the battery to extreme conditions such as high
temperatures or shocks. Otherwise, personal injury will be caused by
the leakage of electrolytic solution.
Always make sure the battery is dry and clean before charging.
• Make sure the battery is fully charged before first time using.
• The battery is not fully charged when you buy, you must charge 2/3 hours
before using first time.
• Before recharging the battery, check the remaining charge on the display.
• Need to replace battery if battery running time is not enough. Users can
only use the original equipment manufactured by the customer center
(OEM) battery pack.
• Keep safety rules and environment protection information in mind all the time.
www.kamikazevolpi.com
KV4
25mm
14.4V
28 W
2.0A
≥3A
Ⅱ
0.78 kg
2.5 Ah
14.4V
20,000 ties (10,000 X battery)
0.25 kg
100-240V AC ,50-60Hz
DC16.8V
1.4A
Ⅱ
2-3 h
98
ELECTRONIC CORDLESS TYING MACHINE
10.1 BATTERY CHARGING PROCEDURE
• Charge at temperature of +10°C ~ +22°C indoor.
• The three-way battery charger allows you to recharge the 2 batteries
supplied at the same time
• Make sure specifications on battery and adapter matched before
charging.
• Connect the plug of the battery charger to the battery to recharge it (if it
is necessary it is possible to connect all two batteries at the same time).
• The batteries will be recharged simultaneously.
• The Red LED on the battery charger indicates that charging is in progress,
the Green LED indicates that the batteries are fully charged. The average
charging time is 2/3 h for each battery.
• Please make sure the battery charged at least once every 4 months when
the battery is not using.
11. WORKING ENVIRONMENT
• Keep temperature of environment at 0°C ~ 45°C when charging battery,
-10°C ~ +60°C when battery is working.
• Keep tool at temperature of -5°C ~ 30°C when working
12. ASSEMBLE BATTERY
Please check if tying machine and battery are clean and dry, then conduct
assembly according to the following steps:
• Take the previously charged battery from the case and insert it in the
appropriate seat of the tying machine
• See the following figures:
www.kamikazevolpi.com
99