Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Oil radiator
01. INTRODUCTION
Thank you for purchasing our radiator. Each unit has been manufactured to ensure its quality and
reliability. Read these instructions carefully before using them for the first time, and keep them
for future reference.
02. ASSEMBLY
Remove the radiator and all accessories from the cardboard box.
1. Turn the radiator over.
2. Place the wheel fixings between the end elements.
3. Fix the wheels using the supplied nuts and butterflies.
4. Tighten the butterfly nuts.
5. Reset the radiator to its original position.
03. LIST OF COMPONENTS
1. Switch.
2. Thermostat control.
3. Operating pilot.
4. Handle.
5. Elements.
6. Wheels.
7. Cable support.
04. OPERATION OF YOUR OIL RADIATOR
Place the heater on the floor at least 90 cm. separate from the wall and any other objects such as
furniture, curtains or plants.
(Make sure that the power supply used corresponds to the one specified in the label technique
220-230V 50Hz).
With the switch and thermostat in the "O" position, connect the radiator to the source of feeding.
10
4
3
1
2
5
7
6
Publicidad
