Publicidad
Idiomas disponibles
Idiomas disponibles
Before each use, check that the appliance is in good condition, that the electrical cord is not
damaged: if the power cord is damaged, it must be replaced by the manufacturer or its technical
assistance service or in any case by a person with similar qualifications. in order to prevent any
risk.
Attention: the stove can only be used if complete with base.
A)
To operate easily, lay the stove horizontally on a flat surface.
1.
Take the 2 parts that make up the base
2.
Assemble the base
3.
Rest your body on the base.
4.
Secure the base with the plastic nut.
B) Insert the plug into a power socket.
C) Select the power by turning the switch knob:
• OFF position: Off
• 400W position: 400 watts.
• 800W position: 800 watts.
• 1200 W position: 1200 watts.
• 1200W OSC position: 1200 watts with oscillation
• OSC 800W position: 800 watts with oscillation
• OSC 400W position: 400 watts with oscillation
D) Rotation and swing:
This stove can swing right and left 90 degrees
E) After use, turn the switch to the "OFF" position and remove the plug.
For long periods of inactivity, remove the plug from the socket.
CLEANING AND MAINTENANCE
Warning: before cleaning the appliance, turn it off, unplug it from the socket and wait until it
has cooled down.
Protect the device from dust to preserve its reflective capacity.
To clean the body, use a soft, slightly damp cloth; do not use metal wool pads or
abrasive products.
The protective grid and the honeycomb mesh are particularly delicate; if necessary,
use a vacuum cleaner to clean them, taking care not to damage them.
When the stove is not in use, it must be covered and stored in a dry place; it is
advisable to pack it in the original packaging to protect it from dust and humidity.
To replace the lamps (type 220-240V 400W) a special tool is required: contact an
authorized service center also for any repairs.
11
Publicidad
