ARDES AR4B02 Folleto De Instrucciones página 12

Instructions for use
GB
SUPPORT BASE ASSEMBLY.
Before performing any assembly operation, make certain that the
appliance is switched off and disconnected from the power outlet.
Assemble the heating body to the support base, passing the cord through
the appropriate slot.
Turn the appliance over, screw on the screws to fix the heating body to
the base, tightening them correctly.
USER INSTRUCTIONS.
To turn on the appliance, insert the plug into the power outlet and position
the appropriate switch on I or II according to whether you would like to
operate the appliance with a single lamp or with both.
To activate the oscillating function, position the switch on appropriate
symbol.
The appliance is equipped with an automatic turn-off system in case it
falls over accidentally.
Before connecting or disconnecting the appliance, make certain that all
the switches are in the off position.
Before replacing the appliance in its packaging, check that it has cooled
sufficiently.
Maintenance
GB
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the appliance and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
12