WolfPack HRH24S Manual De Instrucciones página 55

OPERATING
WARNING - DANGER!
During operation the appliance must be positioned on a firm, stable
surface.
WARNING: High pressure hose must not loop.
Starting Up
1. Turn the water source on. Squeeze the trigger about 1 minute until low pressure
water flow out to empty air out of the unit.
Warning: This unit is intended to be used with cold water only! Do not use hot water
in this pressure cleaner!
2. Turn the switch of the pressure wash to "ON/I" position, then press trigger.
Note: Before pressing trigger, make sure lock-off switch is in "unlock" position.
Warning: Do not start the machine without connecting and turning on the water
supply because it may cause damage to high pressure seals and reduce the service life
of pump.
3. Select the right nozzles
Squeeze the trigger, high pressure water flow will come out. You could rotate
Adjustable nozzle collar to change it from a full fan spray (diagram 1) to a direct
stream spray (diagram 2).
Warning: When operating the machine, it is forbidden to use in the inverted state.
Warning: High pressure jets can be dangerous if subject to misuse. The jet must not
be directed at persons, live electrical equipment or the appliance itself.
Warning: Do not direct the jet against yourself or others in order to clean clothes or
foot-wear.
Waring: Spray gun must be turned off when changing nozzles.
55