Publicidad
Idiomas disponibles
Idiomas disponibles
diagram 1
diagram 2
4. Cleaning
Begin with the nozzle 1-2ft away from the surface and approach with caution
until it reaches the desired position for overly close spray may do harm to surface.
Warning: Do not connect the machine to water supplies that are dirty, rusty, muddy,
or corrosive. ( Including window cleaning liquids, plant foods, or fertilizers etc.)
*This picture is for use only, please refer to the actual machine you purchased.
5. When you finis your clean job, release the trigger and turn the switch to "OFF/O"
position, then turn off the water supply.
Note: When not in use, make sure Lock-off switch is in "Lock" position.
Note: when using pressure washer after water supply off, serious damage could
occur to the pump and / or motor.
Warning: never disconnect high pressure discharge hose from machine while system
is pressurized. To depressurize, turn motor off, turn water supply off and squeeze gun
trigger 2-3 times.
6. Unplug the power cord from the power outlet.
Warning: Check that the supply voltage and frequency correspond to those specified
on the appliance data plate. The appliance should only be connected to a mains
power supply via a security breaker (Max.30mA) to cut off the electricity supply in the
instance of a short circuit.
56
Publicidad
