Publicidad
Idiomas disponibles
Idiomas disponibles
In this modality the machine works as a classical carpet extractor. After filling the tanks with solution
and inserting the plug in the wall outlet (see steps 1 and 2 of the paragraph Preparation for work), you
need to perform the following operations:
1. Connect the machine to the wand or to the hand-tool using the solution and the vacuum hoses. To
connect the hoses to the machine, remove the vacuum hose, which connects the upper tank to
the vacuum shoe, and the solution hose, which connects the pump to the 5 spraying nozzles,
situated under the machine. By doing so, Powerful becomes a standard carpet extractor.
Solution hose
2. Switch on the vacuum motors by setting their switches to position "I", and the pump by setting the
switches to position "II". In this way the solution pump always works and it is not necessary to
keep pressed the control lever situated on the control panel.
3.
To spray water you need to press the lever situated on the handle of the accessory.
Use with accessories
15
Vacuum
hose
Publicidad
