Cleaning & Maintenance
WARNING! Before cleaning, unplug the power plug first; do not connect or disconnect the power
plug with wet hands, as there is a risk of electric shock and injury.
Do not spill water directly on the appliance, thus avoiding rust, electricity leakage and accidents.
Regular cleaning of this appliance helps to prolong its life.
External cleaning
Clean dust accumulated on the surface of the appliance frequently.
After using detergent, be sure to rinse it with clean water and then wipe it dry with a cloth.
Note: Never use metal scouring pads as this may damage painted, chrome and plastic surfaces.
WARNING! Do not use bristle brushes, wire brushes, detergent, soap powder, alkaline detergent,
benzene, gasoline, acid, hot water and other corrosive or soluble elements to clean the surface of the
appliance, door gasket, plastic decorative parts, etc. to avoid damage. Carefully dry the door gasket,
clean the groove with a wooden stick wrapped with cotton thread.
Cleaning the door
Clean the glass and door gasket after each wash to remove possible
lint and/or detergent/softener residues, as leaks may occur.
If any rust stains are found inside the drum, they should be removed
with non-chlorine detergent.
Cleaning of the detergent dispenser
1.
Open the detergent dispenser, press the locking mechanism and pull out the dispenser completely
from the opening.
2. Clean the dispenser with plenty of water to remove detergent and fabric softener residues.
3. Clean the dispenser shaft with a soft brush.
4. Insert the dispenser into the recess until the locking mechanism clicks.
1
Important! Depending on the model, the locking mechanism of the detergent dispenser may vary in
symbol and location. The above figure is for reference only.
Note: Do not use abrasive or caustic type agents to clean the plastic parts.
Note: Perform a thorough cleaning of the detergent dispenser, following the above steps, at least once a
month to ensure normal operation of the appliance.
2
44
3
English
4
infiniton.es